Twin Shaft Compulsory Concrete Mixer

Twin Shaft Compulsory Concrete Mixer

Features：Fast mixing speed.
Application：lt is more suitable for mixing medium & large aggregate particle size.

Troubleshooting Guide:

• 
  

  Mixing Motor Failure:

Causes: Overload, large stones stuck in the mixing drum, thermal relay set too low.

Solution: Check and clean between the mixing blade and liner, reset the thermal relay, adjust the relay’s set current to a suitable value.

• 
  

  Worn or Broken Mixing Blade:

Manifestation: Weakened mixing effect, blade thinning or breaking.

• 
  

  Damaged or Improperly Installed Bearings:

Manifestation: Increased noise, unstable operation.

Solution: Inspect for bearing damage or correct installation, replace or reseat as needed.

• 
  

  Coupling Misalignment:

Impact: Unstable transmission, accelerated wear.

• 
  

  Bent Mixing Shaft or Improper Bearing Seat Installation:

Manifestation: Excessive equipment vibration, unstable operation.

• 
  

  Loose Mixing Blade Bolts:

Impact: Altered blade angle, reduced mixing effectiveness.

• 
  

  Entangled Foreign Objects or Large Particles in Material:

Manifestation: Reduced mixing efficiency, potential equipment jamming.

• 
  

  Blade Shaft Scaling:

Issue: Long-term operation leads to compacted materials like wet ash, affecting performance.

Solution: Regularly clean the shaft and use chemical cleaners for stubborn deposits.

Technical Parameters